2SC5200, 2SA1943 transistörleriyle ampli

MeKa06

Gold Member
2sc5200 2sa1943 amplifikatör devre şeması PCB var. Bir NPN ve PNP transistör amplifikatör devresi Şeması. ayrıca başka bir PNP ve NPN transistörü kullanabiliriz. burada bu devrede, 2sc5200 ve 2sa1943 transistör kullanıyoruz. Şimdi, bu devre şeması amplifikatör dünyası için çok popüler. bu 2 transistör devre şemasıdır. bir transistör 1.3 amper alabilir. Burada 2 transistör kullanıyoruz, böylece 2 X 1.3 = 2.6 amper kullanabiliriz. Bu devreden kaç watt alabiliriz? Voltaj X Amper = Watt olduğunu biliyoruz. 35 voltaj ve 2,5 amper kullanacağız. Böylece 35X2.5 = 87.5 Watt elde edebiliriz.

V9Bnav.jpg
 

Eklentiler

  • MVRGp1.jpg
    MVRGp1.jpg
    128,7 KB · Görüntüleme: 36
Son düzenleyen: Moderatör:
In this post I make a 100 watts mono amplifier board using 2SC5200 & 2SA1943 Transistor.. This is class H amplifier [30hz-20khz]. This ic can make 100 watts output. For power supply you can use 30-0-30 to 70-0-70 volt transformer. Now follow my steps for this amplifier. First we make pcb. For make pcb you need pcb layout. download the pcb layout and print it by laser printer on photo paper. Then cut the pcb layout. Then press the pcb layout by iron on copper clad board. Press the iron 10-15 munites. Then leave the pcb for cool down 10 munites. when the pcb was cool, put the pcb in water and move the pcb layout to copper clad board. Then put the pcb in ferric chloride [FeCl3+H2O] for etching 10-15 munites. when etching was end, clean the pcb by water. Then make hole on pcb. And then press the upper side print of pcb. Now your pcb is ready mount components by instruction.
 

Eklentiler

  • 2sc5200 and 1943 pcb layout front.jpg
    2sc5200 and 1943 pcb layout front.jpg
    297,8 KB · Görüntüleme: 132
  • 2sc5200 and 1943 pcb layout back.png
    2sc5200 and 1943 pcb layout back.png
    157 KB · Görüntüleme: 150
Geri
Yukarı