40 watt

How This Circuit works When see a circuit as Figure 1 Many people would doubt that. This circuit will be amplified up to 40 watts. (If as the RMS will is about 17.5 watts at load 4 ohms). You do not insult it because the many circuits that were contained in IC1-HA13001 of Hitachi there. Makes a...

A 2 stage 40w amp using 28v devices. RF input power should be between 0.5 and 1 watt. The diagram below shows a 2N3375 driving a 2N5643 but there are many other devices that will work. I used these 2 transistors just because they were cheap at the time. If any of the variable capacitors are at...

Power is 22W into 8 ohm speakers and 40W into 4 ohms. Distortion is 0.012% at 1 kHz / 8 ohm/11W and 0.032% at 1 kHz / 4 ohm/20W. Curent Offers variates IC1 ultimately for the input audio signal, so there will be a similar variation on the R6, R7, R8 and R9. Until the current is close to 1A...